Next bot, waiting for the brain

3D printed. ABS. Ord bot Hadron. Work in progress.

LCD cape V2

New board design.
5 inch LCD for beaglebone / beaglebone black. 
Resolution: 800x480, 24 bit color, PWM backlight control, 10 points multitouch capacitive touchscreen, 4 user buttons. Power is taken from the beaglebone. Consists of 3 boards - stackable cape for beaglebone, LCD with adapter, board with buttons. 
It can be bought here: Auctiva store

3d printed LCD case

LCD 10.1" B101UAN01 with HDMI input from ebay. Selller chinatobby2011. 1920x1200. Works perfect. But it is missing case. After some work case is printed. The LCD is very large for printing case for it in single part. It exceeds my Ordbot maximum dimensions (200x200 mm). So i assembled it from the smaller parts. 4 sides and back printed separately, mounted with 1.5mm self tapping screws.

It shipped like this.

Case for the boards

Case for LCD mounted

Everything is mounted

XBMC working.

http://www.thingiverse.com/thing:333734

Heatbed auto level.

Just set up auto leveling in my Ord Bot Hadron. Works perfect.

http://www.thingiverse.com/thing:304512

RAMPS Arduino death

So after 3 month of my 3d printer working - one day it stops to communicate with PC. After some research - the dead 5V regulator is found at Arduino board. I run it at 14V because of heatbed. The voltage at the heatbed is 12V only when I put 14V from the power supply. 2V drops on wires to the heatbed. So I must put 14V from the power supply. I replaced regulator with LP2950L 5.0. It is getting hot, but works for 2 week now.

The Project Release (LCD cape)

Everything is ready. Project is online.

http://igg.me/at/nh5cape/x/6837489

LCD cape final prototype

Just received a backlight board. Everything works including backlight in Android. Soon will be for sale.