qq2440 boot

Here is a video of qq2440 booting in custom shell. Currently it can select IGo or image viewer.

Buildroot qq2440 again

This is complete manual how to build filesystem for qq2440 (s3c2440 or mini2440) - last version.

Download last buildroot snapshot from snapshots.
Don't use release - it has a problems.
Unpack it to some directory

#tar -xvjf buildroot-xxx.tar.bz2

#cd buildroot

#make menuconfig

Now select:
Target architecture (arm)
Target architecture variant (arm920t)
Target ABI (EABI)

Toolchain:
[*] Enable large file (2GB) support
[*] Enable IPV6
[*] Enable RPC
[*] Enable toolchain locale/i18n support
[*] Use software floating point by default
[*] Build/install c++ compiler
Leave other toolchain options unchanged

Target filesystem options:
[*] tar the root filesystem
Compression method (bzip2)

Exit, save

#make

Resulting filesystem exists in buildroot/binaries/uclibc/rootfs.arm.tar.bz2
You can unpack it and mount as NFS filesystem.

In Package selection for the target select desired packages. Not everything will build. I have succesfully built : links, e2ffsprogs, usbutils, alsa-lib, alsa-utils, mpg123, dialog, directfb with samples, SDL, Qt embedded

qq2440 and bluetooth GPS

I have created an application. This application based on printUI example from Windows CE. It creates COM5. This port you should select in iGo for GPS.

Application is here. I have copied it to SD card.

I assume that you have enabled bluetooth in windows CE as I described in previous post.

Start application in your windows CE device. It displays small icon in system tray.

If you start application first time, do the following:

Click on icon. The main window is opened.
Turn on your bluetooth GPS.
Press "inquiry" and wait. After 1 minute you should see your GPS in list.
Select your GPS and press OK. Window closes and you can use your GPS now.

You don't need to repeat inquiry. You do this only once - first time. Program writes in registry correct values for next runs.

For second and next runs after reset - only start program. Icon in system tray says that port is open. You can run iGo now.

If you want to delete all registry keys written by this program - press "Deregister" and make inquiry again.

qq2440 + iGo8 + bluetooth howto

How the stuff works

Part 1: iGo

First of all you need iGo 8 on SD card. In iGo8 install directory (StorageCard/NavNgo/iGO8) find file SYS.TXT and open it. Change/add the following:

[interface]
resolution_dir="800_480"
vga=0

[rawdisplay]
highres=0
screen_x=800
screen_y=480

If something missing – add it, if something present – change it. 800x480 – my screen resolution. If you have different resolution – change this numbers to yours. Now you should be able to start iGo.

Part2: BT Dongle

Open WinCE platform builder.
Open your project.
Open “Communication services and networking – Networking PAN – Bluetooth – Bluetooth protocol stack with transport driver support”.
Delete all except “Bluetooth stack with integrated USB driver”.
Now clean and build your platform.
After building and loading new platform you should be able to start Bluetooth dongle.
Go to “Settings – Control panel”. Double click on “Bluetooth device”. In opened window press “Scan Device”. You should view Bluetooth devices in range.

Part3: You need to open virtual COM port and associate it with Bluetooth. I’ll describe it later

GPS and qq2440 (continue)

GPS works. I have connected bluetooth USB dongle and bluetooth GPS. And there is a sample in Windows CE platform builder for virtual com port. I made some changes in it. Here is the results.

Navngo IGo 8 on qq2440

IGo 8 is running on qq2440. Finally something good. Now I'm looking for RS232 GPS.

Buildroot for qq2440 (continue)

I compiled buildroot with external toolchain, because of internal buildroot bug. It seems to be exist in last release. When I tried to compile buildroot and toolchain for arm - it didn't work. My board didnt recognize this filesystem.
Yesterday I downloaded buildroot snapshot "buildroot-20090420". Internal toolchain is OK now. And almost everything is compiled now. You only need to choose target architecture "arm" and cpu "arm920t".

Update 20.Aug.2009
Use updated manual

Building root filesystem for qq2440 with buildroot

Download buildroot from http://buildroot.uclibc.org/downloads/
I'm using 2009.02 release.

Download eldk for compiling
here
This is an iso image. Burn it and install it. I installed 2 versions (with software FP and with hardware FP) in /usr/local/cross. Actually we need to compile with software FP.

#tar -xvjf buildroot-2009.02.tar.bz2
#cd buildroot-2009.02
#make menuconfig

Now select:
Target architecture - arm
Target architecture variant - arm920t
Target ABI - EABI

Toolchain:
Toolchain type : External binary toolchain
Core C library : libc-2.6.so
Libraries to copy : clear all
Enable large file support - check
Enable RPC - check
Use software floating point by default - check
Build c++ compiler - check
External toolchain path : /usr/local/cross/usr

Target filesystem options:
Uncheck all
tar the root filesystem - check
Compression method : bzip2

Exit, save

#make

Root filesystem exists in binaries/uclibc

Now copy all libraries from /usr/local/cross/arm/lib to rootfs/lib. I need to explore what libraries we need exactly.

Deploy image to the board. I'm booting from nfs and in this configuration you can see linux booting in console.

Thanks for help to Leshak

Update 07-Mar-2009:
Tool chain: Libraries to copy:
ld-linux.so.3 libcrypt.so libdl.so libgcc_s.so libm.so libnsl.so libpthread.so libresolv.so librt.so libutil.so libc.so.6

Update 20.Aug.2009
Use updated manual

S3C2440 board

I'm back. This time I bought a s3c2440 development board - qq2440. 7" LCD, USB host, Linux and Windows CE development stuff. Great thing